Product Description

Cores bearing factory

Deepgroove ball bearing are particularly versatile.They are simple in design,non-separable,suitable for high and even very high speeds and are robust in operation,requirying little maintenance.Deep raceway grooves and the close conformity between the raceway grooves and the ball enable deep groove ball bearings to accommodate axial loads in both directions,in addition to radial loads,even at high speeds,Single row deep groove ball bearings are the most widely used bearing type.
Feartures:
1.Low density. As the rolling body density decreases, high-speed operation of its centrifugal load is also reduced, which can work at higher speed.
2.Moderate elastic modulus. Elastic modulus is too large due to stress concentration and reduce the bearing capacity of the bushing.
3.Thermal expansion coefficient is small. Reduce the sensitivity to temperature changes, so that the bearing operating temperat.
4.High compressive strength. High compressive strength is the need for high stress for rolling bearings.
5.High hardness and high toughness. These 2 properties combine to achieve better surface roughness; and can prevent external par
6.Good anti-rolling contact fatigue and has a peel failure mode.
Special occasions should have high temperature, corrosion resistance and stability.
Applications:
The ceramic material has low density, medium elastic modulus, thermal expansion coefficient is small, high hardness, high temperature, corrosion resistance, non-magnetic, etc., to silicon nitride ceramic ball for the rolling body of ceramic ball bearings can significantly improve the bearing contact fatigue life, Has greatly expanded the application of rolling bearings, has been widely used in a variety of high-precision, high-speed machine tools, automobiles, racing, subway, motor, aero engine, petrochemical machinery, metallurgical machinery and other fields.

Bearing No. Boundary Dimensions(mm) Basic Load Rating (KN) Weight
Open Shields Seals d D B Cr. Cor. (Kg)
6000 6000-Z 6000-2Z 6000-RS 6000-2RS 10 26 8 4.58 1.98 0.02
6001 6001-Z 6001-2Z 6001-RS 6001-2RS 12 28 8 5.1 2.36 0.02
6002 6002-Z 6002-2Z 6002-RS 6002-2RS 15 32 9 5.6 2.85 0.033
6003 6003-Z 6003-2Z 6003-RS 6003-2RS 17 35 10 6 3.25 0.04
6004 6004-Z 6004-2Z 6004-RS 6004-2RS 20 42 12 9.4 5 0.07
6005 6005-Z 6005-2Z 6005-RS 6005-2RS 25 47 12 10 5.85 0.083
6006 6006-Z 6006-2Z 6006-RS 6006-2RS 30 55 13 12.7 8 0.126
6007 6007-Z 6007-2Z 6007-RS 6007-2RS 35 62 14 16 10.2 0.163
6008 6008-Z 6008-2Z 6008-RS 6008-2RS 40 68 15 16.6 11.6 0.2
6009 6009-Z 6009-2Z 6009-RS 6009-2RS 45 75 16 20 14.3 0.253
6571 6571-Z 6571-2Z 6571-RS 6571-2RS 50 80 16 20.8 15.6 0.282
6011 6011-Z 6011-2Z 6011-RS 6011-2RS 55 90 18 28.5 21.2 0.409
6012 6012-Z 6012-2Z 6012-RS 6012-2RS 60 95 18 29 23.2 0.413
6013 6013-Z 6013-2Z 6013-RS 6013-2RS 65 100 18 30.5 25 0.464
6014 6014-Z 6014-2Z 6014-RS 6014-2RS 70 110 20 38 31 0.642
6015 6015-Z 6015-2Z 6015-RS 6015-2RS 75 115 20 39 33.5 0.676
6016 6016-Z 6016-2Z 6016-RS 6016-2RS 80 125 22 47.5 40 0.893
6201 6201-Z 6201-2Z 6201-RS 6201-2RS 12 32 10 6.8 3.05 0.039
6202 6202-Z 6202-2Z 6202-RS 6202-2RS 15 35 11 7.8 3.75 0.045
6203 6203-Z 6203-2Z 6203-RS 6203-2RS 17 40 12 9.58 4.78 0.064
6204 6204-Z 6204-2Z 6204-RS 6204-2RS 20 47 14 12.7 6.55 0.11
6205 6205-Z 6205-2Z 6205-RS 6205-2RS 25 52 15 14 7.8 0.133
6206 6206-Z 6206-2Z 6206-RS 6206-2RS 30 62 16 19.3 11.2 0.201
6207 6207-Z 6207-2Z 6207-RS 6207-2RS 35 72 17 25.5 15.3 0.299
6208 6208-Z 6208-2Z 6208-RS 6208-2RS 40 80 18 29 18 0.382
6209 6209-Z 6209-2Z 6209-RS 6209-2RS 45 85 19 31 20.4 0.407
6210 6210-Z 6210-2Z 6210-RS 6210-2RS 50 90 20 36.5 24 0.478
6211 6211-Z 6211-2Z 6211-RS 6211-2RS 55 100 21 43 29 0.632
6212 6212-Z 6212-2Z 6212-RS 6212-2RS 60 110 22 52 36 0.807
6213 6213-Z 6213-2Z 6213-RS 6213-2RS 65 120 23 60 41.5 1.03
6214 6214-Z 6214-2Z 6214-RS 6214-2RS 70 125 24 62 44 1.11
6215 6215-Z 6215-2Z 6215-RS 6215-2RS 75 130 25 66 49.5 1.7
6216 6216-Z 6216-2Z 6216-RS 6216-2RS 80 140 28 72.5 53 2.1
6217 6217-Z 6217-2Z 6217-RS 6217-2RS 85 150 28 84 62 2.1
6218   6218-2Z   6218-2RS 90 160 30 96.5 72 2.26
6219   6219-2Z   6219-2RS 95 170 32 108 81.5 2.79
6220   6220-2Z   6220-2RS 100 180 34 122 93 3.36
6221   6221-2Z   6221-2RS 105 190 36 133 105 3.99
6300 6300-Z 6300-2Z 6300-RS 6300-2RS 10 35 11 8.15 3.45 0.057
6301 6301-Z 6301-2Z 6301-RS 6301-2RS 12 37 12 9.65 4.15 0.064
6302 6302-Z 6302-2Z 6302-RS 6302-2RS 15 42 13 11.4 5.4 0.09
6303 6303-Z 6303-2Z 6303-RS 6303-2RS 17 47 14 13.4 6.55 0.117
6304 6304-Z 6304-2Z 6304-RS 6304-2RS 20 52 15 15.8 7.8 0.155
6305 6305-Z 6305-2Z 6305-RS 6305-2RS 25 62 17 22.4 11.4 0.24
6306 6306-Z 6306-2Z 6306-RS 6306-2RS 30 72 19 26.5 16.3 0.363
6307 6307-Z 6307-2Z 6307-RS 6307-2RS 35 80 21 33.5 19 0.481
6308 6308-Z 6308-2Z 6308-RS 6308-2RS 40 90 23 42.5 25 0.654
6309 6309-Z 6309-2Z 6309-RS 6309-2RS 45 100 25 53 31.5 0.869
6310 6310-Z 6310-2Z 6310-RS 6310-2RS 50 110 27 61.8 38 1.12
6311 6311-Z 6311-2Z 6311-RS 6311-2RS 55 120 29 71.5 47.5 1.43
6312 6312-Z 6312-2Z 6312-RS 6312-2RS 60 130 31 82 52 1.79
6313 6313-Z 6313-2Z 6313-RS 6313-2RS 65 140 33 92.5 59.5 2.08
6314 6314-Z 6314-2Z 6314-RS 6314-2RS 70 150 35 104 68 2.52
6315 6315-Z 6315-2Z 6315-RS 6315-2RS 75 160 37 113 77 3.02
6316 6316-Z 6316-2Z 6316-RS 6316-2RS 80 170 39 123 86.5 3.59

 

Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Searl Type: Zz 2RS Open
Samples:
US$ 0.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bushing

Advantages and disadvantages of different types of bushings

Bushings are a simple but essential part of machinery with sliding or rotating shaft assemblies. This type of bearing is used in a wide variety of industries because its high load-carrying capacity and excellent anti-friction properties make it a necessity for construction, mining, hydropower, transportation and agricultural machinery. In addition to these applications, bushings also play a vital role in material handling and food processing. This article explores the various types of bushings available.

air casing

The air bushing forms a frictionless cylinder that applies the load to the rotating object. Bushings are used to measure torque and provide self-centering force in applications where linear motion is critical. The following are load equations that can be used to select the appropriate air sleeve for your application. To learn more about these air sleeves, read on. This article discusses the benefits and uses of air bushings in linear motion.
Bushings have many advantages over bearings. They are not prone to wear and corrosion. Unlike bearings, they can easily bypass conversion and inspection periods. Their high-quality design guarantees reliable machine performance, yet they are inexpensive and easy to replace. In many industries, air compressors are essential for sports. The air bushing eliminates friction, allowing the compressor to work more efficiently. They can also help eliminate the need for frictionless bearings and improve the overall efficiency of the machine.
Another type of air bearing is the cylindrical bushing. These are used for linear and aerostatic motion. Their low friction properties allow them to support radial loads without wearing out or damaging components. They are usually used for normal sized shafts. Air bushings have several components that can be used with other types of air bearings. Cylindrical air bearings have four o-ring grooves that allow them to be inserted into the structure. They are often used with other types of air bearings for smoother motion.

rubber bushing

If you’re looking to buy a new suspension system, you may be wondering if rubber or polyurethane is the right choice. Rubber is less expensive, but not without its drawbacks. Polyurethane is more durable and offers better handling and suspension. Rubber bushings also reduce road feel, while polyurethane isolates the driver from the road. Both materials will help you improve handling and alignment, but each has advantages and disadvantages.
Typically, rubber bushings are cylindrical components with metal inner and outer surfaces. These metals can be stainless steel, mild steel or aluminum. They are usually stress relieved and prestressed for maximum durability. They are designed to meet the exact specifications of a specific application. For example, shock-absorbing rubber bushings are cushioning pads made of polyurethane that absorb road bumps and noise.
Unlike polyurethane, rubber suspension bushings have a shorter lifespan than polyurethane. This is because rubber is more susceptible to damage from UV rays, road chemicals and oils. The rubber also stretches and warps due to the pressure of the road. The rubber bushing also squeaks, which can be cause for concern. But if the noise persists for a long time, it may be a sign that your vehicle needs a new suspension system.
The main reason why cars use rubber bushings is for shock absorption. During machine use, vibration and noise caused by the movement of parts can cause serious damage. To prevent this, rubber bushings act as shock absorbers and damping agents. Rubber bushings are an excellent choice for automakers, but they are also used in a variety of industrial settings.
bushing

Polyurethane bushing

If you want to make your vehicle handle better, polyurethane bushings may be the answer. They come in different shapes and sizes and can improve a wide range of areas. This article will explore the advantages and disadvantages of polyurethane bushings and their potential place in your car. However, before you decide to upgrade your suspension, you should understand the various advantages and disadvantages of polyurethane bushings.
The main difference between a polyurethane bushing and a rubber bushing is how the bushing rides on the suspension arm. Polyurethane bushings do not have faces that slide against each other like rubber bushings. This means they allow for more rotation and flexion, as well as consistent alignment of the control arms. Polyurethane bushings require lubrication, but only need to be lubricated every five years, much longer than equivalent rubber bushings.
Another difference between polyurethane and rubber bushings is hardness. The former has the least elasticity and is generally the most suitable for street use. While rubber bushings provide the best NVH quality, they are also notorious for changing suspension geometry. Rubber is known to be an excellent choice for street use, but polyurethane has a lifespan that far outlasts rubber.

bronze bushing

There are two main types of bronze bushings, sintered and cast. The latter require additional lubrication and are typically used in applications where powder metal products cannot be secured. The former is cheaper than the latter, but the process is more expensive. Bronze bushings can be used in environments where the material will be exposed to high temperature and vibration. For these reasons, the production process is relatively slow and expensive.
The strength of bronze is the main reason why they are so popular. Brass is a softer metal that deforms and corrodes easily. The bronze casing can withstand continuous immersion in water and can last for hundreds of years with little or no maintenance. However, it is important to note that this metal is not resistant to aggressive chemicals and requires regular maintenance to keep it in good condition.
Bronze bushings offer many advantages, including durability and aesthetics. Bronze bushings are available in a variety of sizes and can be ordered in imperial and metric sizes. They can be built to your specifications and are very durable. You can even custom order them if you want. And because they can be customized, they are an excellent choice for high-end applications. The quality of the bronze bushings is second to none.

Plastic bushing

Engineered composite plastic bushings have been shown to last longer than bronze bushings and have also been found to reduce maintenance costs by up to 40%. Plastic bushings have become the first choice for thousands of applications, including medical equipment, food processing machinery, pumps, and more. Bronze bushings are oil-impregnated, but their performance is limited by their inherent weaknesses: oil-impregnated bronze tends to develop high levels of capillary action and requires rotational motion to maintain an intact oil film. Low speed and intermittent use of bronze bushings can also hinder the ability of the lubricant to provide adequate lubrication.
Advantages of plastic bushings over metal include low friction, non-reactive surfaces, and long life. CZPT offers a variety of engineering plastics that outperform traditional metals in a range of applications. For example, nylon bushings resist wear while requiring little lubrication. In addition, polymer-shaped plastics are lightweight and highly resistant to aggressive cleaning agents and chemicals.
Besides being less expensive than metal bushings, plastic bushings offer many other advantages. They are very durable, have a low coefficient of friction, and are more wear-resistant than metal. Unlike metal, plastic bushings do not require lubrication and do not absorb dust and oil like metal bushings. They are lightweight, easy to maintain and last longer. This makes them an excellent choice for many applications.
bushing

Sleeve bearing

Sleeve bearings are simple pipes with matching components. They facilitate linear motion by absorbing friction and vibration. They can withstand heavy loads and work at high temperatures for long periods of time. Flange bearings are similar to sleeve bearings, but are enclosed and rotated in a housing unit. Sleeve bearings have higher load-carrying capacity and resistance to shock loads. Furthermore, they are lightweight and low cost.
Another name for sleeve bearings is babbitt radial bearings. These bearings are usually made of bronze and have straight inner and outer diameters. They are also impregnated with oil and can withstand radial loads. Typical uses for sleeve bearings are agriculture, automotive and machine tools. Sleeves can also be solid or cored material, depending on the intended use.
The type of sleeve bearing used in the bushing is important in determining which type of bushing to buy. Sleeve bearings are sized based on pressure and speed considerations. Typically, the PV limit is an upper bound on the combined pressure and velocity for a given casing material. In some cases, the sleeve bearing used in the bushing is the same as the plain bearing.
Sleeve bearings are simple in design and made from a variety of materials, including bronze and plastic. They are more affordable than metal, but plastic is still not inaudible. Plastic sleeve bearings will rattle like metal bearings if the gap between the two bushings is not accurate. Additionally, high temperature electronic painting can permanently thin the casing. The stainless steel backing provides a good surface for electronic painting and enhances abrasion resistance.

China Good quality Guide Line Track Roller U V Slewing Wheel Hub Deep Groove Sliding Rolling Spherical  Ball  Bearing   bearing engineeringChina Good quality Guide Line Track Roller U V Slewing Wheel Hub Deep Groove Sliding Rolling Spherical  Ball  Bearing   bearing engineering
editor by CX 2023-04-19