Product Description

Aluminum linear CZPT rail bearing block/  linear motion ball slide units SBR10 SBR10UU SBR10LUU
Linear guides and rails provide a smooth, precise, guiding surface on which the rolling element of a linear bearing rides. They are an integral part of linear bearings, typically ordered separately from the rolling element component. They must exhibit this in terms of speed, temperature stability, accuracy, and noise levels. Our linear CZPT is available in several sizes to accommodate loads of all types, from light to heavy, and offer suitable for use in numerous applications, such as machine design requiring incorporation of linear CZPT products into the machine structure. We produce a complete range of linear guides designed to satisfy the most demanding requirements

This is the sliding unit with the aluminum case, shafts, and aluminum rail for preventing deflexion.

This is the complete sliding unit system and can be clamped simply tightening by a bolt with high accuracy.

Support Rail Unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, 

and ensures the performance of the unit.

 

We can provide the SBR/TBR Linear Rail Supports with a diameter from 10 to 50, Max. length up to 6000mm

Application,

Linear motion guide rail and block TBR/SBR Series with smooth surface, little friction, low noise,

are widely used in linear motion systems. For example, punch, tool grinding machine,

 automatic cutting machine, printer, card sorting machine, Food Packing Machine, 

other sliding parts on industrial machinery. 

 

LM linear bearing:
LM3UU, LM4UU, LM5UU, LM6UU, LM8UU, LM8S, LM10UU, LM12UU, LM13UU, LM16UU,
LM20UU, LM25UU, LM30UU, LM35UU, LM40UU, LM50UU, LM60UU, LM80UU, LM100UU
 
Linear Slide Unit:
 
1. Close Type: SC8UU, SC10UU, SC12UU, SC13UU, SC16UU, SC20UU, SC25UU, SC30UU, SC35UU, SC40UU, SC50UU, SC60UU (normal type)
SC8WUU, SC10WUU, SC12WUU, SC13WUU, SC16WUU, SC20WUU, SC252UU, SC30WUU, SC35WUU, SC40WUU, SC50WUU (long type) SC8VUU, SC10VUU,SC12VUU, SC13VUU, 
SC16VUU, SC20VUU, SC25VUU, SC30VUU, SC35VUU, SC40VUU, SC50VUU(Short type)
 
2. Open Type: SBR10UU, SBR12UU, SBR13UU, SBR16UU, SBR20UU, SBR25UU, SBR30UU, SBR35UU, SBR40UU, SBR50UU(Normal type) SBR10LUU,SBR12LUU, SBR13LUU, SBR16LUU, 
SBR20LUU, SBR25LUU, SBR30LUU, SBR35LUU, SBR40LUU, SBR50LUU(Long type) TBR16UU, TBR20UU, TBR25UU,TBR30UU (This type with the flange at the pillow block)

Unit Designation Dimensions(mm) Slide bush  
h E W L F h1 q B C S L1 T Designation Dynamic Static Mass kg
SBR 10UU 15 18 36 32 24 6 80° 25 20 M5 10 7 LM10UU-OP 372 549 65
SBR 13UU 17 20 40 39 27.6 8.5 80° 28 28 M5 10 8 LM13UU-OP 510 784 100
SBR 16UU 20 22.5 45 45 33 10 80° 32 30 M5 12 9 LM16UU-OP 774 1180 150
SBR 20UU 23 24 48 50 39 10 60° 35 35 M6 12 11 LM20UU-OP 882 1370 200
SBR 25UU 27 30 60 65 47 11.5 50° 40 40 M6 12 14 LM25UU-OP 980 1570 450
SBR 30UU 33 35 70 70 56 14 50° 50 50 M8 18 15 LM30UU-OP 1570 2740 630
SBR 35UU 37 40 80 80 63 16 50° 55 55 M8 18 18 LM35UU-OP 1670 3140 925
SBR 40UU 42 45 90 90 72 19 50° 65 65 M10 20 20 LM40UU-OP 2160 4571 1330
SBR 50UU 53 60 120 110 92 23 50° 94 80 M10 20 25 LM50UU-OP 3820 7940 3000
SBR 16LUU 20 22.5 45 85 33 10 80° 32 60 M5 12 9 LM16LUU-OP 1548 2360 300
SBR 20LUU 23 24 48 96 39 10 60° 35 70 M6 12 11 LM20LUU-OP 1764 2740 400
SBR 25LUU 27 30 60 130 47 11.5 50° 40 100 M6 12 14 LM25LUU-OP 1960 3140 900
SBR 30LUU 33 35 70 140 56 14 50° 50 110 M8 18 15 LM30LUU-OP 3140 5480 1260
SBR 40LUU 42 45 90 175 72 19 50° 65 140 M10 20 20 LM40LUU-OP 4320 8040 2660

We also supply other bearings as following:
1.Deep Groove Ball Bearings

2.Angular Contact Ball Bearings

3.Self-aligning Ball Bearing

4.Thrust Ball Bearings

5.Cylindrical Roller Thrust Bearings

6.Taper Roller Bearings

7.Spherical Roller Bearings

8.Cylindrical Roller Thrust Bearings

9.Spherical Roller Thrust Bearings

10.Needle Roller Bearings

11.Ceramic Ball Bearings

12.Joint Bearings

13.Pillow Block Bearings

14.Auto Bearings

15.Slewing Bearings
 

FAQ:

Q: Are you a trading company or manufacturer?

A: We are a factory of the bearing in china

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock,
it is according to the quantity of the bearing china.

Q: Do you provide samples? is it free or extra?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What are your terms of payment?

A: Payment=10000USD, 30% T/T in advance ,
balance before shippment.
If you have another question, pls feel free to contact us.

Application: Warehouse Crane, Shipboard Crane, Goods Yard Crane, Building Crane, Workshop Crane
Material: Stainless Steel
Structure: Bucket Crane
Installation: Machinery
Driven Type: Hydraulic
Carrying Capacity: Special Weight Level
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bearing

Understanding the Different Types of Bearings

When you are looking for a bearing, you have many options to choose from. This article will explain the various types, functions, and working principles of different types of bearings. Once you understand the basic components, you can make an informed decision about which one to buy. Here’s an overview of some of the most common types. Learn more about each type below! Read on to learn about the differences between these different types of bearings! Posted in Articles

Functions

Bearings serve as an integral part of a mechanical device. These devices help transfer torque from one part of a structure to another. These mechanisms increase the efficiency of a shaft by increasing its life. However, the functions of bearings depend on the application of the structure. Among other functions, bearings provide support to shafts. Anti-friction bearings come in two types: ball and roller bearings. These components have line and point contact, which is the most common type. Archimedes’s principle states that the force is equal to the weight of the fluid that is being displaced. Bearings can transfer lateral loads to a substructure.
A bearing has two primary functions. The first is to prevent direct metal-to-metal contact. A bearing prevents friction, heat generation, and wear and tear of components. A bearing also reduces energy consumption. Its other purpose is to guide and support a rotating body. In addition to these functions, bearings can also reduce wear and tear on a machine. As a result, they are among the most widely used machines in the world.
Seals are a major component of a bearing. They prevent foreign materials from entering and lubricating the moving parts. The design of seal lips determines their effectiveness. Fuel economy regulations and CO2 emissions regulations are pushing the demand for low-friction bearings. However, high-performance seals do not always provide high-performance. As a result, current estimations of the friction in bearings depend on trial and error methods.
Another important function of bearings is that they transfer the load of a rotating component to its housing. This load can be axial or radial. Bearings also limit movement to predefined directions. Some types of rolling element bearings have balls or cylinders inside. These bearings are less frictional than sliding ones, thus they allow parts to move freely during rotation. These parts can then be used for various applications. So, bearings are an integral part of machines.

Types

The most common type of bearing is a plain bearing. It uses surfaces in rubbing contact to transmit movement from one part to another. These bearings may be discrete or may consist of a hole in a metal sleeve or a planar surface bearing another part. Some plain bearings are flanged, while others are made of a sleeve with a flange at one end. These bearings often give acceptable accuracy and life, but they are expensive and cannot be used in large scale applications.
Radial bearings are used when there is a need for high-speed or corrosive parts. This type of bearing also serves as a support in an intermediate situation. Its two components are called the base and the cover. The base and cover are connected and are arranged parallel to the main axis. This type of bearing is used in steady-state and axial motion applications. The radial bearings are also used when the shafts are long.
Angular contact bearings are another type of bearing. These are easy to install and require minimal maintenance. Their races are displaced along the axis. They are also better at handling axial loads and transferring them to the housing. These types of bearings are commonly used in pumps, automobiles, and high-speed applications. If you are looking for an affordable, reliable bearing, look no further than the angular contact bearing.
Another type of bearing is a self-lubricating bushing. These are lightweight and wear-resistant. Unlike the other types of bearing, they do not require any lubrication or maintenance. In fact, some are completely maintenance-free. But if you’re worried about maintenance, this type of bearing may be a good choice. There are many benefits of using self-lubricating bushings. It is also a good option for applications where your machine is exposed to extreme temperatures.

Working principle

bearing
A bearing has two primary functions: support and load transfer. In engineering applications, the bearing tends to push the load in the direction of the shaft. A radial load pushes the bearing downward and a thrust load pushes it sideways. Both types of load transfer are important in a variety of applications. The working principle of each type is described below. Listed below are the main uses for each type of bearing.
A plain bearing uses a PTFE liner on the interface of two moving parts. The PTFE liner acts as a lubricant and may be filtered to alter its friction. The journal bearing uses the motion of the journal to force fluid into the gap between two moving parts. This results in a small amount of play in the bearing. This play is acceptable for most applications. A ball bearing may have a maximum play of 2 mm for a ten-millimeter shaft.
The primary function of a bearing is to assist in rotation and to reduce mechanical friction between the two objects. A bearing may be installed as a separate device or as an integral part of a machine. For more complex applications, bearings are very precise components requiring the highest standards of technology. For this reason, it is important to understand the working principle of bearings. The next time you need to lift or slide a heavy object, consider a bearing.
Ball bearings are a common type of ball bearing and can be found in industrial machinery and automobiles. Their unique structure helps them support less weight. This is because they are comprised of two rings – an inner race and an outer race. The balls themselves have a small area of contact and transfer axial loads in one direction. A cage surrounds the balls and prevents them from colliding. This makes ball bearings a popular choice for many applications.

Sealing system

A bearing’s seals are vital for the operation of rolling and rotating components. These systems enable rotation and linear movement while limiting friction and dispersing stress. Without the proper seals, these components could face catastrophic failure. In addition to protecting the bearing from external forces, seals help retain lubricant inside the system and prevent harmful particles from entering the gap. A seal’s lubrication helps prevent the onset of mechanical damage and prolongs the life of the bearing.
A bearing seal is made up of two parts: the inner sealing element and the outer sealing element. A passageway runs through the bearing assembly to the outer seal element. A hydraulic press or pneumatic jack is recommended for installing the seal. These tools are effective in reducing deformation and improving seal installation quality. When fitting the seal, ensure that the tool does not hit the seal directly. A proper adopter will distribute the load uniformly across the seal.
The seal’s efficiency depends on its gap. A four-inch shaft seal can flow 0.5 standard cubic feet per minute. A seal’s efficiency is highly dependent on the gap size. The gap size is a cube of the flow through the system. A smaller gap size allows high flow and pressure but less leakage. If both surfaces of the seal have similar pressures and flow rates, the seal is efficient. However, a small gap reduces the pressures and reduces wear.
Mechanical seals have numerous advantages, including their ability to protect against contaminants and splashing liquids. Labyrinth seals are the first line of defense against leaks. They operate without friction. Their high level of sealing efficiency helps ensure that the bearing remains operational for long. This type of seal is made from metal plates and is designed for a wide temperature range and misalignment. Its advantages include being easy to install and offering 100% sealing efficiency.

Maintenance

bearing
Bearing maintenance is critical to ensuring that your bearings keep operating at their peak performance. Proper maintenance will improve bearing life, reduce downtime and increase productivity while reducing costs. Here is an 8-point checklist to optimize your bearings and make them last longer. To optimize their performance, you should follow these steps regularly. In case a bearing does not last long, you should replace it as soon as possible. Listed below are some tips to ensure proper maintenance.
The first step is to determine how often your bearings require lubrication. Some manufacturers recommend that you lubricate them weekly, but this can do more harm than good. Instead, use ultrasound to measure the level of friction and trend its levels. This way, you will know exactly when to grease your bearings. It’s also important to check how often they should be inspected and calibrated. A professional can provide guidance on proper maintenance.
Next, inspect your bearings for cracks and scratches. You should never install a bearing that has been dropped or scratched. Even a small crack will affect the performance of the bearing and could lead to its premature failure. A proper alignment is essential for the bearing to function properly. Make sure you have the correct tools to perform this task. These tools can help you reduce manual work and promote safe bearing maintenance. You should also ensure that the shaft and housing are clean and undamaged.
Proper maintenance can prolong bearing service life. Proper lubrication, mounting, inspection, basic condition monitoring, and dismounting can extend their life. Proper maintenance extends their lifespan and improves plant productivity. While bearings are essential for machinery, you should make sure you follow the proper safety procedures every time you work with them. These tips will also help prevent accidents and maintain your machine’s efficiency. Once you’ve followed these guidelines, you can safely inspect your bearings and ensure that they’re operating at their optimum capacity.

China best Aluminum Linear Guide Rail Bearing Block/ Linear Motion Ball Slide Units SBR10 SBR10uu SBR10luu   connecting rod bearingChina best Aluminum Linear Guide Rail Bearing Block/ Linear Motion Ball Slide Units SBR10 SBR10uu SBR10luu   connecting rod bearing
editor by CX 2023-04-20